NETGEAR WG103 ProSafe, Справочное руководство

Страница: 28 / 120

WG103 ProSafe 802.11g Wireless Access Point Reference Manual
2-6 Basic Installation and Configuration
v1.0, February 2009
3. Click Apply to save your settings.
4. Click Time. The Time Settings screen appears. (The full path to his screen is Configuration >
System > Basic > Time .)
Specify the following fields:
• Time Zone. Select the time zone to match your location.
• Current Time . The current time, as used on the wireless access point, is displayed.
• NTP Client. Select one of the following radio buttons:
– Enable . Your wireless access point synchronizes with a Network Time Protocol
(NTP) server.
– Disable . Your wireless access point does not synchronize with an NTP server.
• Use Custom NTP Server. Enable this check box if you want to use a custom NTP server.
• Hostname / IP Address. Provide the hostname or IP address of the time server that the
wireless access point must use to keep its time correct. The default is time-b.netgear.com.
5. Click Apply to save your settings.
Figure 2-4
Note: You must have an Internet connection to use an NTP server that is not
on your local network.