WG103 ProSafe 802.11g Wireless Access Point Reference Manual
3-10
Wireless Security
v1.0, February 2009
For authentication, accounting, or both authentication and accounting using RADIUS, you
must configure primary servers. Complete the IP Address, Port No. and Shared Secret
fields to enable communication with the RADIUS server. You can configure a secondary
RADIUS server that is used in case the primary RADIUS server fails.
–
IP Address
. The IP address of the RADIUS server.
–
Port Number
. The port number of the RADIUS server. The default port for an
authentication server is 1812; the default port for a accounting server is 1813.
–
Shared Secret
. This value is shared between the wireless access point and the
RADIUS server while authenticating the supplicant.
•
Reauthentication Time (Seconds)
. The time interval in seconds after which the
supplicant will be authenticated again with the RADIUS server. The default is 3600
seconds.
•
Update Global Key Every (Seconds)
. Select this check box to enable re-keying of the
global key, and enter a value in seconds. The global key re-key can be done based on time
interval in seconds. The default is 1800 seconds.
4.
Enter the settings, and click
Apply
.
Configuring WEP
To configure WEP data encryption:
1.
Log in to the wireless access point at its default LAN address of
http://192.168.0.229
with its
default user name of
admin
, and default password of
password
, or using whatever password
and LAN address you have chosen for the wireless access point.
2.
Select
Configuration
>
Security
>
Profile Settings
. The Profile Settings screen displays (see
Figure 3-2 on page 3-5
.)
3.
Select a profile by selecting the corresponding radio button from the list, and click
Edit
. The
Edit Security Profile screen displays.
Figure 3-5 on page 3-11
shows an example with a Shared
Key network authentication.
Note:
If you use a wireless computer to configure wireless security settings, you will be
disconnected when you click Apply. Reconfigure your wireless computer to match
the new settings, or access the wireless access point from a wired computer to
make further changes.
Содержание WG103 ProSafe
