manualshive.com logo in svg

NETGEAR ProSecure, Справочник по аппаратуре

Поделиться
Скачать
NETGEAR ProSecure Скачать руководство пользователя страница 315

ProSecure Unified Threat Management (UTM) Appliance Reference Manual

Managing Users, Authentication, and Certificates

9-5

v1.0, January 2010

4.

Click 

Apply

 to save your settings. The domain is added to the List of Domains table.

5.

If you use local authentication, make sure that it is not disabled: select the 

No

 radio button in 

the Local Authentication section of the Domain screen (see 

Figure 9-1 on page 9-3

).

Authentication Type 
(continued)(

•

WIKID-CHAP

. WIKID Systems CHAP. Complete the Authentication Server 

and Authentication Secret fields.

•

MIAS-PAP

. Microsoft Internet Authentication Service (MIAS) PAP

. 

Complete 

the Authentication Server and Authentication Secret fields.

•

MIAS-CHAP

. Microsoft Internet Authentication Service (MIAS) CHAP.

 

Complete the Authentication Server and Authentication Secret fields.

•

NT Domain

. Microsoft Windows NT Domain. Complete the Authentication 

Server and Workgroup fields.

•

Active Directory

. Microsoft Active Directory. Complete the Authentication 

Server and Active Directory Domain fields.

•

LDAP

. Lightweight Directory Access Protocol (LDAP). Complete the 

Authentication Server and LDAP Base DN fields.

Select Portal

The pull-down menu shows the SSL portals that are listed on the Portal Layout 
screen. From the pull-down menu, select the SSL portal with which the domain 
is associated. For information about how to configure SSL portals, see 

“Creating the Portal Layout” on page 8-18

.

Authentication Server

The server IP address or server name of the authentication server for any type 
of authentication other than authentication through the local user database.

Authentication Secret

The authentication secret or password that is required to access the 
authentication server for RADIUS, WIKID, or MIAS authentication.

Workgroup

The workgroup that is required for Microsoft NT Domain authentication.

LDAP Base DN

The LDAP base distinguished name (DN) that is required for LDAP 
authentication.

Active Directory 
Domain

The active directory domain name that is required for Microsoft Active Directory 
authentication.

Note: 

A combination of local and external authentication is supported.

Warning: 

If you disable local authentication, make sure that there is at least one 

external administrative user otherwise access to the UTM is blocked.

Table 9-2. Add Domain Settings (continued)

Setting

Description (or Subfield and Description)

Содержание ProSecure





































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды