NETGEAR ProSecure Скачать руководство пользователя страница 169

Страница: 169 / 484

ProSecure Unified Threat Management (UTM) Appliance Reference Manual

Content Filtering and Optimizing Scans

6-3

v1.0, January 2010

Configuring E-mail Protection

The UTM lets you configure the following settings to protect the network’s e-mail
communication:

•

The e-mail protocols that are scanned for malware threats.

•

Actions that are taken when infected e-mails are detected.

•

The maximum file sizes that are scanned.

•

Keywords, file types, and file names in e-mails that are filtered to block objectionable or high-
risk content.

•

Customer notifications and e-mail alerts that are sent when events are detected.

•

Rules and policies for spam detection.

Education

Allowed with the exception
of School Cheating.

Gaming Blocked

Inactive Sites

Allowed

Internet Communication and Search

Allowed with the exception
of Anonymizers

Leisure and News

Allowed

Malicious Blocked

Politics and Religion

Allowed

Sexual Content

Blocked

Technology

Allowed

a. Files or messages that are larger than 2048 KB are skipped b y default.

Table 6-1. Default E-mail and Web Scan Settings (continued)

Scan Type

Default Scan Setting

Default Action (if applicable)

Содержание ProSecure





































































































































































































































































































































































































































































































Результаты поиска

Содержание ProSecure

Отзывы:

Бренды по названию

Популярные бренды

NETGEAR ProSecure, Справочник по аппаратуре

Результаты поиска

Содержание ProSecure

Отзывы:

Бренды по названию

Популярные бренды