manualshive.com logo in svg

NETGEAR ProSecure, Справочник по аппаратуре

Поделиться
Скачать
NETGEAR ProSecure Скачать руководство пользователя страница 154

ProSecure Unified Threat Management (UTM) Appliance Reference Manual

5-40

Firewall Protection

v1.0, January 2010

5.

Click 

Apply

 to save your settings. The new bandwidth profile is added to the List of 

Bandwidth Profiles table.

6.

In the Bandwidth Profiles section of the screen, select the 

Yes

 radio button under Enable 

Bandwidth Profiles? (By default the 

No

 radio button is selected.)

7.

Click 

Apply

 to save your setting.

To edit a bandwidth profile:

1.

In the List of Bandwidth Profiles table, click the 

Edit 

table button to the right of the bandwidth 

profile that you want to edit. The Edit Bandwidth Profile screen displays.

2.

Modify the settings that you wish to change (see 

Table 5-8

).

3.

Click 

Apply 

to save your changes. The modified bandwidth profile is displayed in the List of 

Bandwidth Profiles table.

Table 5-8. Bandwidth Profile Settings

Setting

Description (or Subfield and Description)

Profile Name

A descriptive name of the bandwidth profile for identification and management 
purposes.

Minimum 
Bandwidth

The minimum allocated bandwidth in Kbps. The default setting is 0 Kbps.

Maximum 
Bandwidth

The maximum allowed bandwidth in Kbps. The default setting and minimum setting is 
100 Kbps; the maximum allowable bandwidth is 100000 Kbps.

Type

From the 

Type

 pull-down menu, select the type for the bandwidth profile:

•

Group

. The profile applies to all users, that is, all user share the available bandwidth.

•

Individual

. The profile applies to an individual user, that is, each user can use the 

available bandwidth.

Maximum Number 
of Instances

If you select Individual from the Type pull-down menu, you must 
specify the maximum number of class instances that can be 
created by the individual bandwidth profile.

Direction

From the 

Direction

 pull-down menu, select the traffic direction for the bandwidth 

profile:
•

Outbound Traffic

. The profile applies to outbound traffic only.

•

Inbound Traffic

. The profile applies to inbound traffic only.

Содержание ProSecure





































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды