WG102-500, WGAP150 ProSafe 802.11g Wireless Access Point Reference Manual
4-2
Troubleshooting
v1.0, February 2009
You cannot configure the wireless access point from a browser
Check these items:
•
The wireless access point is properly installed, LAN connections are OK, and the unit is
powered on. Check that the LAN port LED is green to verify that the Ethernet connection is
OK.
•
If your computer uses a fixed (static) IP address, ensure that it is using an IP address in the
range of the wireless access point. The wireless access point default IP address is
192.168.0.229 and the default subnet mask is 255.255.255.0. The wireless access point default
setting is for a static IP address.
•
If the network where you are connecting it is using DHCP, configure it accordingly.
You cannot access the Internet or the LAN with a
wireless-capable computer
There is a configuration problem. Check these items:
•
You may not have restarted the computer with the wireless adapter to have TCP/IP changes
take effect. Restart the computer.
•
The computer with the wireless adapter may not have the correct TCP/IP settings to
communicate with the network. Restart the computer and check that TCP/IP is set up properly
for that network. The usual setting for Windows on the Network Properties is “Obtain an IP
address automatically.”
•
The wireless access point’s default values may not work with your network. Check the
wireless access point default configuration against the configuration of other devices in your
network.
FullManual.book Page 2 Thursday, January 29, 2009 10:12 AM
