NETGEAR ProSafe WG102-500, Справочное руководство

Страница: 34 / 52

WG102-500, WGAP150 ProSafe 802.11g Wireless Access Point Reference Manual
2-18 Configuration
v1.0, February 2009
Auto WDS Mode
Table 2-14 shows the auto WDS mode settings.
Manual WDS Mode
Table 2-15 shows the manual WDS mode settings.
Table 2-14. Auto WDS Mode Settings
Field Descriptions
Node Type This pulldown menu allows you to make one of the following selections:
•
Auto Detect. The wireless access point checks the connectivity to the default
gateway via wired Ethernet to determine the node type. If there is connectivity to
the default gateway, the wireless access point states its node type as gateway.
Otherwise, the wireless access point states its node type as node.
• Wired . The wireless access point must be wired to provide public network
access to other wireless nodes.
• Wireless . The wireless access point searches wirlessly for the best gateway or
node in order to gain public network access.
AES passphase The encryption passphase for AES encryption to secure the data between APs.
Figure 2-16
Table 2-15. Manual WDS Mode Settings
Field Descriptions
Enable Select the Yes radio button to enable manual WDS.
MAC Address The MAC address of the other AP to form a WDS link with.
Security Policy For information about configuring Static WEP, see “Static WEP Parameters” on page 2-13 .
FullManual.book Page 18 Thursday, January 29, 2009 10:12 AM