WG102-500, WGAP150 ProSafe 802.11g Wireless Access Point Reference Manual
Configuration
2-9
v1.0, February 2009
Wireless Networks Settings
When you select
Wireless Networks
under the Configure section on the navigation bar on the left,
the general wireless network settings are displayed, which are shown in
.
Ethernet Settings
Speed
Select the Ethernet speed from the pulldown menu.
Scheduled Tasks
Reboot
Based on the set schedule, the system reboots automatically.
Auto Channel Selection Based on the set schedule, and when no clients are associated with the wireless
access point, the system performs auto channel selection to avoid congested
channels.
Table 2-8. General Wireless Network Settings
Field
Descriptions
WLAN SSID
The SSID of the virtual Access Point.
Default VLAN ID
This setting specifies the VLAN ID to be tagged on all outgoing packets generated
from the virtual AP (i.e. packets that travel from the Wi-Fi segment, through the
wireless access point to Ethernet segment via the LAN port).
If 802.1x is enabled, a per-user VLAN ID can be specified in the authentication
reply from the Radius server. If this is set, the value specified via Default VLAN ID
will be overridden.
Admin Status
The status of the virtual AP: enabled or disabled.
Security Policies
The configured wireless authentication and encryption methods.
BSSID
The detailed BSSIDs
Table 2-7. Neighbor AP DIscovery, Ethernet, and Schedules Task Settings (continued)
Field
Descriptions
FullManual.book Page 9 Thursday, January 29, 2009 10:12 AM
