4. Select
ADVANCED > Advanced Setup > Wireless Settings
.
The Wireless Settings page displays.
5. Scroll down below the WPS Settings section and select or clear the
Enable MU-MIMO
check box.
Selecting this check box enables MU-MIMO. Clearing this check box disables
MU-MIMO.
6. Click the
Apply
button.
Your settings are saved.
If you connected over WiFi to the network, you are disconnected from the network
and must reconnect.
Ethernet Port Aggregation
Ethernet aggregation lets aggregate two Ethernet ports on your router to improve the
aggregated file transfer speed.
To set up Ethernet port aggregation, connect a device that supports Ethernet port
aggregation and 802.3ad to Ethernet aggregate ports 1 and 2 on your router. Note that
Ethernet port aggregation is also referred to as link aggregation, teaming port, and
port trunking.
Warning:
To avoid causing broadcast looping, which can shut down your network, do
not connect an unmanaged switch to Ethernet ports 1 and 2 on your router.
W
X
P
W
X
P
Figure 7. Ethernet port aggregation
Set Up Ethernet Port Aggregation
If you are connecting a switch, make sure that your switch supports 802.3ad LACP.
User Manual
95
Manage Network Settings
Nighthawk AX12 12-Steam AX6000 WiFi Router
