NETGEAR FS700TS, Руководство по администрированию программного обеспечения

Страница: 71 / 190

FS700TS Smart Switch Software Administration Manual
Managing System Settings 3-37
v1.0, September 2007
– Disable – Disable the device from sending authentication failure notifications.
2. Select either Enable or Disable in the SNMP Notifications provided field.
3. Select either Enable or Disable in the Authentication Notifications provided field.
4. Click APPLY to update the device.
Trap Configuration
The SNMPv3 Trap Configuration screen contains information for defining filters that determine
whether traps are sent to specific users, and the trap type sent. SNMP notification filters provide
the following services:
• Identifying Management Trap Targets
• Defining Trap Filtering
• Selecting Trap Generation Parameters
• Providing Access Control Checks
To define trap station management:
1. Click System > SNMP > SNMPv3 > Trap Configuration . The SNMPv3 Trap Configuration
screen displays:
The SNMPv3 Trap Configuration screen contains the following fields:
• Recipients IP – Enter the IP address to which the traps are sent.
• Notification Type – Select the type of notification sent. The possible field values are:
– Traps – Traps are sent.
– Informs – Informs are sent.
• User Name – Enter the user name. The field range is up to 30 alphanumeric characters.
Figure 3-21