manualshive.com logo in svg

NETGEAR FS700TS, Руководство по администрированию программного обеспечения

Поделиться
Скачать
NETGEAR FS700TS Скачать руководство пользователя страница 148

FS700TS Smart Switch Software Administration Manual

6-20

Managing Security

v1.0, September 2007

3.

Enter the provided fields in the first row.

4.

Click 

ADD

 to update the device.

To delete a MAC rule:

1.

Click

 

Security > ACL > MAC Rules

. The MAC Rules screen displays.

2.

Select the 

ACL Name

 from the list in the provided field.

3.

Select the rule entry.

4.

Click 

DELETE

 to remove the entry.

MAC Binding Configuration

To bind interfaces to an ACL: 

1.

Click 

Security > ACL > MAC Binding Configuration

. The MAC Binding Configuration 

screen displays:

The MAC Binding Configuration screen contains the following fields:

MAC Binding Configuration

•

ACL Name

 – Select the ACL Name for viewing and modifying ACL bound interfaces.

•

VLAN

 – Select the VLAN to bind to the ACL.

2.

Select the 

ACL Name

 from the list in the provided field.

3.

Select the 

VLAN

 to bind to the selected ACL.

4.

Click 

APPLY

 to update the device.

Figure 6-12

Содержание FS700TS































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды