manualshive.com logo in svg

NETGEAR FS700TS, Руководство по администрированию программного обеспечения

Поделиться
Скачать
NETGEAR FS700TS Скачать руководство пользователя страница 137

FS700TS Smart Switch Software Administration Manual

Managing Security

6-9

v1.0, September 2007

•

Guest VLAN

 – Select whether the Guest VLAN is enabled or disabled on the device. The 

default VLAN cannot be defined as a Guest VLAN. The possible field values are: 

–

Disable – Disable the Guest VLAN on the device. This is the default value.

–

Enable – Enable using a Guest VLAN for unauthorized ports. If a Guest VLAN is 
enabled, the unauthorized port automatically joins the VLAN selected in the VLAN 
List field.

•

Guest VLAN ID 

– Select the guest VLAN ID from the list of the currently defined 

VLANs.

2.

Select Disable or Enable for the 

Port Based Authentication State

 in the provided field.

3.

If you selected Enable for the 

Port Based Authentication State

, then select the 

Authentication Method

 from the list in the provided field.

4.

Select Disable or Enable for the 

Guest VLAN

 status in the provided field.

5.

If you selected Enable for the 

Guest VLAN

 field, then select the 

VLAN ID

 from the list in the 

provided field.

6.

Click 

APPLY

 to update the device.

Advanced

The Port Authentication 

Advanced

 menu contains the following options:

•

“802.1X Configuration”

•

“Port Authentication”

802.1X Configuration

The Advanced 802.1X Configuration screen allows network managers to configure network 
authentication parameters. In addition, Guest VLANs are enabled from the Advanced 802.1X 
configuration screen.

Содержание FS700TS































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды