NETGEAR FS700TS, Руководство по администрированию программного обеспечения

Страница: 158 / 190

FS700TS Smart Switch Software Administration Manual
7-8 Monitoring the Switch
v1.0, September 2007
– Critical – The third highest warning level. A critical log is saved if a critical device
malfunction occurs; for example, two device ports are not functioning, while the rest
of the device ports remain functional.
– Error – A device error has occurred; for example, if a single port is offline.
– Warning – The lowest level of a device warning. The device is functioning, but an
operational problem has occurred.
– Notice – Provides device information.
– Informational – Provides device information.
– Debug – Provides debugging messages.
2. Select the server entry.
3. Enter the Server IP address in the provided field in the first row.
4. Enter the UDP Port number in the provided field in the first row.
5. Select the Facility assigned to the server from the list in the provided field in the first row.
6. Enter an optional server Description in the provided field in the first row.
7. Select the Minimum Severity level message sent to the server from the list in the provided
field in the first row.
8. Click APPLY to update the device.
To add a remote log server:
1. Click Monitoring > Logs > Server Log . The Server Log screen displays.
2. Enter the Server IP address in the provided field in the first row.
3. Enter the UDP Port number in the provided field in the first row.
4. Select the Facility assigned to the server from the list in the provided field in the first row.
5. Enter an optional server Description in the provided field in the first row.
6. Select the Minimum Severity level message sent to the server from the list in the provided
field in the first row.
7. Click ADD to update the device.
To remove a remote log server:
1. Click Monitoring > Logs > Server Log . The Server Log screen displays.
2. Select the log server entry.