manualshive.com logo in svg

NETGEAR FS700TS, Руководство по администрированию программного обеспечения

Поделиться
Скачать
NETGEAR FS700TS Скачать руководство пользователя страница 111

FS700TS Smart Switch Software Administration Manual

Configuring Switching Settings

4-35

v1.0, September 2007

•

Interface Status 

– Select the interface status. The possible field values are:

–

Static – The interface is joined to the Multicast group statically.

–

Forbidden – The interface is forbidden to join the Multicast group.

–

Excluded – The interface is not included in the Multicast group.

2.

Select the 

VLAN ID

 and 

Multicast Address

 from the lists in the provided fields.

3.

Select the interface entry in the Multicast Group table.

4.

Select the 

Interface Status

 from the list in the provided field in the first row. Note that you 

may not specify Dynamic.

5.

Click 

APPLY

 to update the device.

Multicast Forward All

The Multicast Forward All screen contains fields for attaching ports or LAGs to a device that is 
attached to a neighboring Multicast router/switch. Once IGMP Snooping is enabled, Multicast 
packets are forwarded only to the appropriate port or VLAN.

To define Multicast forward all settings: 

1.

Click 

Switching > Multicast > Advanced > Multicast Forward All

.

 

The Multicast Forward 

All screen displays:

Figure 4-24

Содержание FS700TS































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды