manualshive.com logo in svg

NETGEAR FS700TS, Руководство по администрированию программного обеспечения

Поделиться
Скачать
NETGEAR FS700TS Скачать руководство пользователя страница 104

FS700TS Smart Switch Software Administration Manual

4-28

Configuring Switching Settings

v1.0, September 2007

•

Fast Link

 – Select the Fast Link state on the interface. If Fast Link mode is enabled for a 

interface, the Port State is automatically placed in the Forwarding state when the port link 
is up. Fast Link optimizes the STP protocol convergence. The possible field values are:

–

Enable – Enable Fast Link on the interface.

–

Disable – Disable Fast Link on the interface.

•

Port State

 – Displays the current STP state of a port. If enabled, the port state determines 

what forwarding action is taken on traffic. Possible port states are: 

–

Forwarding – STP is enabled on the port, and the port is forwarding packets based on 
the STP topology.

–

Disabled – STP is currently disabled on the port. The port forwards traffic while 
learning MAC addresses.

–

Blocking – The port is currently blocked and cannot forward traffic or learn MAC 
addresses. Blocking is displayed when STP is enabled.

–

Listening – The port is in Listening mode. The port cannot forward traffic nor can it 
learn MAC addresses.

–

Learning – The port is in Learning mode. The port cannot forward traffic, however it 
can learn new MAC addresses.

•

Speed

 – Displays the speed at which the port is operating.

•

Path Cost 

– Enter the method used to assign default path cost to STP ports. The possible 

field range is 1 - 200000000. The default path cost assigned to an interface varies 
according to the selected method.

•

Priority

 – Enter the port priority value. When switches or ports are running STP, each is 

assigned a priority. After exchanging BPDUs, the device with the lowest priority value 
becomes the Root Port. The default value is 32768. The port priority value is provided in 
increments of 4096.

2.

Select the 

STP Status 

and 

Fast Link

 status in the provided fields.

3.

Enter the 

Path Cost 

and 

Priority

 in the provided fields.

4.

Click 

APPLY

 to update the device.

Содержание FS700TS































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды