NETGEAR FS700TS Скачать руководство пользователя страница 55

Страница: 55 / 190

FS700TS Smart Switch Software Administration Manual

Managing System Settings

3-21

v1.0, September 2007

•

Class

– Displays the classification of the powered device. The class defines the maximum

power that can be provided to the powered device. The possible field values are:

–

Class 0 – The minimum power level at the Power Sourcing Equipment is 15.4 Watts.

–

Class 1 – The minimum power level at the Power Sourcing Equipment is 4.0 Watts.

–

Class 2 – The minimum power level at the Power Sourcing Equipment is 7.0 Watts.

–

Class 3 – The minimum power level at the Power Sourcing Equipment is 15.4 Watts.

–

Class 4 – Treated as Class 0.

•

Output Voltage

– Displays the Output Voltage in Volts.

•

Output Current

– Displays the Output current in milliamps.

•

Output Power

– Displays the Output power in Watts.

•

Power Limit

– Displays the power limit in Watts.

•

Status

– Displays the port’s PoE status. The possible field values are:

–

On – The device is enabled to deliver power via the interface.

–

Off – The device is disabled for delivering power via the interface.

–

Test Fail – The powered device test has failed. For example, a port could not be
enabled and cannot be used to deliver power to the powered device.

–

Testing – The powered device is being tested. For example, a powered device is tested
to confirm it is receiving power from the power supply.

–

Searching – The device is currently searching for a powered device. Searching is the
default PoE operational status.

–

Fault – The device has detected a fault on the powered device. For example, the
powered device memory could not be read.

Click on the unit ID, located above the table, to display the PoE information of the unit’s ports.
To display the PoE information for all interfaces of all the units, click

All

Select an interface.

Select the

Admin Mode

and

Priority Level

from the lists in the provided fields in the first

row.

Click

APPLY

to update the device

Содержание FS700TS































































































































































































Результаты поиска

Содержание FS700TS

Отзывы:

Бренды по названию

Популярные бренды

NETGEAR FS700TS, Руководство по администрированию программного обеспечения

Результаты поиска

Содержание FS700TS

Отзывы:

Бренды по названию

Популярные бренды