RangeMax Dual Band Wireless-N Modem Router DGND3300 User Manual
Customizing Your Network Settings
6-18
v1.0, January 2010
Select
Static Routes
under Advanced in the main menu. The Static Routes screen displays.
To add or edit a static route:
1.
Click
Add
to open the Static Routes screen.
2.
In the
Route Name
field, type a name for this static route. (This is for identification purposes
only.)
3.
Select the
Private
check box if you want to limit access to the LAN only. If Private is selected,
the static route is not reported in RIP.
4.
Select the
Active
check box to make this route effective.
5.
Type the destination IP address of the final destination.
6.
Type the IP subnet mask for this destination.
If the destination is a single host, type 255.255.255.255.
7.
Type the gateway IP address, which must be a router on the same LAN segment as the Dual
Band Wireless-N Modem Router.
8.
Type a number between 1 and 15 as the metric value.
This represents the number of routers between your network and the destination. Usually, a
setting of 2 or 3 works, but if this is a direct connection, set it to 1.
9.
Click
Apply
to have the static route entered into the table.
Figure 6-10
Figure 6-11
