Determining the StorageGRID Webscale Appliance Installer version
The title bar of the StorageGRID Webscale Appliance Installer shows the version number. You might
find it helpful to determine the version so that you can use the seven-segment LED codes appropriate
for the version you have.
Before you begin
•
You must have a service laptop with a web browser already installed.
•
You must already have the IP address of the management network.
Steps
1. Using the service laptop, open a web browser and access the StorageGRID Webscale Appliance
Installer web page:
http://169.254.0.1:8080
2. Note the installer version in the title bar.
Note:
The example shows version 1.7 of the StorageGRID Webscale Appliance Installer web
page. Earlier versions are similar, but might not include the version number in the heading.
Unable to connect to StorageGRID Webscale appliance via point-to-point
Ethernet link
Issue
The appliance card fails to boot successfully.
Cause
This issue could occur if the appliance card does not connect due to a networking issue
with the service laptop.
Corrective action
1. Make sure that the seven-segment displays indicate that the appliance is booted and
ready.
2. Verify that the installer's laptop is configured and capable of connecting to a link-local
connection.
3. Reboot the appliance.
4. Refresh the installation web page.
5. Restart the installation.
44 | StorageGRID Webscale 10.4 Appliance Installation and Maintenance Guide
Содержание StorageGRID Webscale 10.4
Страница 2: ......
