NetApp StorageGRID Webscale 10.4, Руководство по установке и обслуживанию

Страница: 30 / 68

Code, if
version is
1.4 or
earlier Code, if
version is
1.5 or
later Indication
22 22 No master boot record found on any boot device.
23 23 No SATA drive installed.
2A, 2B 2A, 2B Stuck bus, unable to read DIMM SPD data.
40 40 Invalid DIMMs.
41 41 Invalid DIMMs.
42 42 Memory test failed.
51 51 SPD reading failure.
92 to 96 92 to 96 PCI bus initialization.
A0 to A3 A0 to A3 SATA drive initialization.
AB AB Alternate boot code.
AE AE Booting OS.
EA EA DDR3 training failed.
E8 E8 No memory installed.
EI EU The installation script was not found.
EM EP "ManageSGA" code indicates that pregrid communication with the
E2700 controller failed.
Related references
Troubleshooting the hardware installation on page 41
Related information
E5600 Controller-Drive Tray and Related Drive Trays Installation Guide
NetApp Support
Configuring the management ports
As part of the hardware installation process, you must configure the management ports on both
controllers.
About this task
Configuring management ports includes these major tasks:
• Adding the storage array to SANtricity Storage Manager, using the IP address of the E2700
controller
• Manually configuring the E2700 controller using SANtricity Storage Manager
• Verifying initial connectivity
• Configuring the E5600SG controller using the StorageGRID Webscale Appliance Installer web
page, which is included with the controller
30 | StorageGRID Webscale 10.4 Appliance Installation and Maintenance Guide