manualshive.com logo in svg

NetApp StorageGRID SG5600 Series, Руководство по установке и обслуживанию оборудования

Поделиться
Скачать
NetApp StorageGRID SG5600 Series Скачать руководство пользователя страница 65

•

You must be signed in to the Grid Manager using a supported browser.

About this task

Options for changing the Ethernet link configuration of the E5600SG controller include:

•

Changing Port bond mode from Fixed to Aggregate, or from Aggregate to Fixed

•

Changing Network bond mode from Active-Backup to LACP, or from LACP to Active-Backup

•

Enabling or disabling VLAN tagging, or changing the value of a VLAN tag

•

Changing the link speed from 10-GbE to 25-GbE, or from 25-GbE to 10-GbE

Before changing the link configuration, you must place the E5600SG controller controller into
maintenance mode. Putting a StorageGRID appliance into maintenance mode might make the
appliance unavailable for remote access.

Steps

1.  Follow these steps to place the E5600SG controller into maintenance mode.

a.  From the Grid Manager, select Nodes.

b.  Select the appliance Storage Node.

c.  Select the Tasks tab.

 

 

d.  Click Maintenance Mode.

A confirmation dialog appears.
 

Maintaining the SG5600 appliance | 65

Содержание StorageGRID SG5600 Series










































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды