manualshive.com logo in svg

NetApp StorageGRID SG5600 Series, Руководство по установке и обслуживанию оборудования

Поделиться
Скачать
NetApp StorageGRID SG5600 Series Скачать руководство пользователя страница 49

2.  Select Tools > AutoSupport > Configuration.

3.  Use SANtricity Storage Manager online help, if needed, to complete the task.

Related information

NetApp Documentation: SANtricity Storage Manager

Verifying receipt of AutoSupport

You should verify that technical support is receiving your AutoSupport messages. You can find the
status of AutoSupport for your systems on the Active IQ portal. Verifying receipt of these messages
ensures that technical support has your information if you need assistance.

About this task

AutoSupport can show one of the following statuses:

ON

An ON status indicates that technical support is currently receiving AutoSupport messages
from the system.

OFF

An OFF status suggests that you might have disabled AutoSupport because technical
support has not received a Weekly Log from the system in the last 15 calendar days or
there might have been a change in your environment or configuration (as an example).

DECLINE

A DECLINE status means that you have notified technical support that you will not
enable AutoSupport.

After technical support receives a Weekly Log from the system, the AutoSupport status changes to
ON.

Steps

1.  Go to the NetApp Support Site at 

mysupport.netapp.com

, and sign in to the Active IQ portal.

2.  If the AutoSupport status is OFF, and you believe that is incorrect, complete the following:

a.  Check your system configuration to ensure that you have turned AutoSupport on.

b.  Check your network environment and configuration to ensure that the system can send

messages to technical support.

Configuring email and SNMP trap alert notifications

SANtricity Storage Manager can notify you when the status of the appliance or one of its
components changes. This is called an alert notification. You can receive alert notifications by two
different methods: email and SNMP traps. You must configure the alert notifications you want to
receive.

Steps

1.  From the Enterprise Management Window in SANtricity Storage Manager, select the Devices

tab, and then select a node.

2.  Select Edit > Configure Alerts.

3.  Select the Email tab to configure email alert notifications.

4.  Select the SNMP tab to configure SNMP trap alert notifications.

Configuring the hardware | 49

Содержание StorageGRID SG5600 Series










































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды