NetApp StorageGRID SG5600 Series, Руководство по установке и обслуживанию оборудования

Страница: 45 / 73

Configuring SANtricity Storage Manager
You can use SANtricity Storage Manager to monitor the status of the storage disks and hardware
components in your StorageGRID appliance. To access this software, you must know the IP address
of management port 1 on the E2700 controller (the storage controller in the appliance).
Steps
1. Setting the IP address for the E2700 controller on page 45
2. Adding the appliance to SANtricity Storage Manager on page 47
3. Setting up SANtricity Storage Manager on page 48
Setting the IP address for the E2700 controller
Management port 1 on the E2700 controller connects the appliance to the management network for
SANtricity Storage Manager. You must set a static IP address for the E2700 controller to ensure that
you do not lose your management connection to the hardware and the controller firmware in the
StorageGRID appliance.
Before you begin
You are using a supported web browser.
About this task
DHCP-assigned addresses could change at any time. Assign a static IP address to the controller to
ensure consistent accessibility.
Steps
1. From the client, enter the URL for the StorageGRID Appliance Installer:
https://E5600SG_Controller_IP:8443
Configuring the hardware | 45