Callout
Which ports are bonded
C
Ports 1 and 3 are bonded together for the Client Network, if this network is used.
G
Ports 2 and 4 are bonded together for the Grid Network.
This figure shows how the four 10-GbE ports are bonded in aggregate port bond mode.
Callout
Which ports are bonded
1
All four ports are grouped in a single LACP bond, allowing all ports to be used for Grid
Network and Client Network traffic.
The table summarizes the options for configuring the four 10-GbE ports. You only need to configure
the settings on the Link Configuration page if you want to use a non-default setting.
Port bond
mode
Network bond
mode
Client Network disabled
(default)
Client Network enabled
Fixed
(default)
Active-
Backup
(default)
•
Ports 2 and 4 use an
active-backup bond
for the Grid Network.
•
Ports 1 and 3 are not
used.
•
A VLAN tag is
optional.
•
Ports 2 and 4 use an active-
backup bond for the Grid
Network.
•
Ports 1 and 3 use an active-
backup bond for the Client
Network.
•
VLAN tags can be specified
for both networks for the
convenience of the network
administrator.
LACP
(802.3ad)
•
Ports 2 and 4 use an
LACP bond for the
Grid Network.
•
Ports 1 and 3 are not
used.
•
A VLAN tag is
optional.
•
Ports 2 and 4 use an LACP
bond for the Grid Network.
•
Ports 1 and 3 use an LACP
bond for the Client Network.
•
VLAN tags can be specified
for both networks for the
convenience of the network
administrator.
36 | Hardware Installation and Maintenance Guide for SG5600 Appliances
Содержание StorageGRID SG5600 Series
Страница 2: ......
