Net Optics IBPO-HB50SR-XFP, Руководство пользователя

Страница: 41 / 53

10 GigaBit iBypass Switch with Heartbeat
5
The following table describes the iBypass Switch options on the Configure Tab.
Field Name Description
IP Address IP address of the iBypass Switch; the default IP address is
10.0.0.1. Change the IP address by typing a new one
in the box.
Netmask IP address of the netmask; the default netmask address
is 55.55.0.0. Change the netmask address by typing a
new one in the box.
System Manager IP
Address IP address of either the host PC running System Manager
over a WAN or the third-party SNMP management tool.
Change the IP address by typing a new one in the box.
Gateway IP Address IP address of the current WAN gateway. Change the
gateway address by typing a new one in the box.
Port Enable ENABLE/DISABLE the monitor port.
Port A Utilization
Threshold Percentage level at which this port use triggers an alarm;
as default the Port A alarm is triggered when Port A ex-
ceeds 50% utilization.
Port B Utilization
Threshold Percentage level at which this port use triggers an alarm;
as default the Port B alarm is triggered when Port B ex-
ceeds 50% utilization.
Port 1 Utilization
Threshold Percentage level at which this port use triggers an alarm;
as default the Port 1 alarm is triggered when Port 1 ex-
ceeds 50% utilization.
Port Utilization
Threshold Percentage level at which this port use triggers an alarm;
as default the Port alarm is triggered when Port ex-
ceeds 50% utilization.
Reset Port A Peak
Rate This value is NO unless you change it to YES. If you set
it to YES, as soon as the port reset is complete, it returns
to NO.
Reset Port B Peak
Rate This value is NO unless you change it to YES. If you set
it to YES, as soon as the port reset is complete, it returns
to NO.
Reset Port 1 Peak
Rate This value is NO unless you change it to YES. If you set
it to YES, as soon as the port reset is complete, it returns
to NO.
Reset Port Peak
Rate This value is NO unless you change it to YES. If you set
it to YES, as soon as the port reset is complete, it returns
to NO.