Net Optics IBPO-HB50SR-XFP, Руководство пользователя

Страница: 29 / 53

10 GigaBit iBypass Switch with Heartbeat
Field Name Description
Reset Port A/Port
B Peak Rate Reset (toggle Yes/No) the rate of peak usage. The Peak
Rate is a traffic measurement during peak time. The Net
Optics iBypass Web Manager will capture the highest
peak rate and time, and then display them in the Statistics
section.
Assume that these peaks occurred:
8:00 AM = 1%;
9:00 AM = 2%;
10:00 AM = 50%;
11:00 AM = 15%;
12:00 AM = 20%;
1:00 PM = 30%;
2:00 PM = 40%;
3:00 PM = 30%;
4:00 PM = 20%;
5:00 PM = 60%.
In the Status window, at 10 AM, 50% was the Peak Rate
and the display remained that way until 5 PM if no reset was
done. If a reset was done at 11 AM, then the Peak Rate
changed to 0% at noon, then 0% at PM, then 0% at
PM, and then 0% at 5 PM.
Reset Port A/Port
B Statistics Reset (toggle YES/NO) the statistics.
Reset Port 1/Port
Statistics Reset (toggle YES/NO) the statistics.
Enable LFD Enable/Disable Link Fault Detection.
Heartbeat Timeout
Period(s) Type a number to indicate the frequency of heartbeat
packets sent in milliseconds (0-100)
Enable/Disable
Detection Turns automatic port detection ON and OFF.
Heartbeat Retries Type a number to indicate the number of retries before
Heartbeat fails.
Set Date and Time Displays a window where you can set the date and time
(-hour clock).
4. Save changes to the iBypass Switch by clicking Submit Changes at the bottom
of the page.
5. To update the display, click your browser's refresh button.