Neptronic SK VAP, Инструкция по установке и эксплуатации

Страница: 13 / 36

13
Neptronic
®
Evaporative Humidification / Cooling System
www.neptronic.com
Step 3 - Connect Feed Water Supply
A feed water supply with a minimum flow of 31 lbs (14 litres) per minute at a pressure of 29 psi (2 bar) should be con-
nected to the 1/2” BSP female threaded connection of the filling hose.
The PureFlo Ag+ assembly should be positioned as close to the SK VAP Evaporative Module inlet as possible, via two
1/2” (15mm) compression fittings. It is advisable to mount the PureFlo Ag+ outside the AHU for ease of access.
Typically, 1/2” (15mm) interconnecting copper pipework will be used. Where water quality exceeds 60ppm, stainless steel
pipework should be used.
Sediment
Silver
Note: Where water quality is purer than 60ppm, stainless steel sup-
ply pipework should be used.
Flow
PureFlo Ag+ Assembly
Filling Hose
1/2” NPT (Female) Threaded Fitting
1/2” (15 mm) Interconnecting Pipework
(Not supplied)
1/2” (15mm) Compression Fitting
1/2” Ball Valve