Page
33
of
76
4.4.2 Store Events/Transients Panel
Navigation: “Store” – “Events”
The
Store Events
panel
allows configuring storing options for capturing events.
The configuration for storing alarms, transients, disturbances and voltage signals can be
done independently.
EN50160 events are stored automatically, if EN50160 time series storing is enabled.
If storing is in progress for selected event type, then only Enabled/Disabled control can be
changed and applied.
6
1
5
2
3
4
7
8
1.
Enabled/disabled button
2.
Name of measurement
3.
Place
4.
Description
5.
Begin- /End-/Type of storing
6.
Begin and End time for
storing
7.
System selection (actual
system or all systems)
8.
Apply and Revert buttons
How to setup storing:
Insert measurement name, description and place (2, 3, 4).
Select “Manually” or “By Time” condition for the begin and end of storing (5).
If there is the
“By Time” condition selected, then select Begin and End time of storing. (6)
Enable storing (1).
Select if changes will be applied to actual system only or to all systems (7).
supported only for multi-system instruments
Click Apply button to apply changes to instrument or Revert button to revert changes (8).
To stop storing just Disable storing (pointer 1) and Apply changes (8).
Содержание PQA8000
Страница 32: ...Page 32 of 76...