Page
12
of
76
3.2
Power ON/OFF Switch
The Power ON/OFF switch is located on the left side on the bottom and has the following
three functions, depending on its position.
3.3
Connector Pins
The majority of connector pins for measurements are located on the top side.
4 banana connectors for voltage measurement are on the left, 6 LEMO connectors for current
measurement sensors are on the right side. DSUB15 for additional low voltage analog signal
input, DSUB9 for RS-485, CAN2.0 and DIO are located on the left side. The status LED on the
upper right side shows the current device/measurement status.
Position
Function
Top
Start (push switch)
Middle
ON after start or standby
(returns to this position after push)
Bottom
OFF (MAX. power saving mode, useful for
long term device storage)
Содержание PQA8000
Страница 32: ...Page 32 of 76...
