Page
11
of
76
3 Hardware
The PQA8000 is an All-in-one Power Quality Analyzer having the most practicable
measurement and computer interface, enabling measurements and analysis as soon as
sensors and cables are connected. Foer further functions like GPS synchronization or data
communication like RS-485, CAN2.0B and DIO, additional cable set are available.
3.1 Instrument
There are 4 banana connector sets for High Voltage
measurement and four or six plastic LEMO connectors for
Current Inputs on the top plate. Furthermore, one DSUB15
connector for low voltage signal measurement, one DSUB9
connector for RS-485 communication and another DSUB9
connector for digital input and output.
On the left side of the case are the computer interface,
GPS antenna connector, battery indicator LED, power
on/off switch and AC power inlet.
On the right side of the case
are three fans for internal
heat controlling.
Sunlight readable
multi-touch LCD
on the front side.
Device support and
handle are on the
rear side mounted.
In addition, you can
operate the touch
screen with a touch
pen located on the
top of the back.
Содержание PQA8000
Страница 32: ...Page 32 of 76...
