User Manual of E Series Network Speed Dome
81
The number of areas supported in ROI function varies depending on the models of speed
dome.
4.
Select the
Region No.
from the dropdown list.
5.
Adjust the
ROI level
from 1 to 6. The higher the value, the better image quality in the red
frame.
6.
Enter a
Region Name
.
ROI for Dynamic Region
1.
Check
Enable Face Tracking
checkbox to enable face tracking, and the captured face picture
is set as region of interest. Adjust the
ROI level
from 1 to 6.
2.
Check
Enable Target Tracking
checkbox to enable target tracking, and the target is set as
region of interest. Adjust the
ROI level
from 1 to 6.
3.
Click
Save
to save the settings.
6.2.4
Dual-VCA Settings
Steps:
1.
Enter the Dual-VCA settings interface:
Configuration > Video/Audio > Display Info. on Stream
2.
Check the checkbox to enable the function of Dual-VCA which can be used cooperatively
with NVR to implement dual-VCA retrieval during playback.
Figure 6-26
Enable Dual-VCA
3.
Click
to save the settings.
6.3
Configuring Image Settings
On the event configuration page, click to show the PTZ control panel or click to hide it.
Click the direction buttons to control the pan/tilt movements.
Click the zoom/iris/focus buttons to realize lens control.
The functions vary depending on the models of speed dome.