User Manual of E Series Network Speed Dome
54
only human beings will be identified as detection objects and as well as Vehicle.
7.
Click
tab to enter the arming schedule setting interface. The time
schedule configuration is the same as the settings of the arming schedule for motion
detection. Refer to
Section
5.2.1 Configuring Motion Detection
.
8.
Click
tab to select the linkage method taken for the video loss alarm,
Notify surveillance center, send email, upload to FTP, trigger channel, smart tracking and
trigger alarm output are selectable. Refer to
Section
5.2.1 Configuring Motion Detection
.
9.
Click
button to save the settings
5.4
PTZ Configuration
On the event configuration page, click to show the PTZ control panel or click to hide it.
Click the direction buttons to control the pan/tilt movements.
Click the zoom/iris/focus buttons to realize lens control.
The functions vary depending on the models of speed dome.
5.4.1
Configuring Basic PTZ Parameters
Purpose:
You can configure the basic PTZ parameters, including proportional pan, preset freezing, preset
speed, etc.
1.
Enter the Basic PTZ Parameter Configuration interface:
Configuration
>
PTZ
>
Basic Settings