User Manual of E Series Network Speed Dome
55
Figure 5-26
Basic PTZ Configuration Interface
2.
Configure the following settings:
Basic Parameters
: Enable/disable PTZ control, proportional pan and preset freezing, set the
preset speed, keyboard control speed, and auto scan speed.
PTZ Control
: By default, PTZ Control function is enabled .You can uncheck the checkbox
to disable the PTZ control function.
The PTZ Control function varies depending on the models of speed dome.
Proportional Pan
: If you enable this function, the pan/tilt speeds change according to
the amount of zoom. When there is a large amount of zoom, the pan/tilt speed will be
slower for keeping the image from moving too fast on the live view image.
Preset Freezing
: This function enables the live view to switch directly from one scene
defined by a preset to another, without showing the middle areas between these two, to
ensure the surveillance efficiency. It can also reduce the use of bandwidth in a digital
network system.
Preset freezing function is invalid when you calling a pattern.
Preset Speed
:
You can set the speed of a defined preset from 1 to 8.
Manual Control Speed
: The speed dome provides 5 control speed modes: Compatible,
Pedestrian, Non-motor Vehicle, Motor Vehicle and Auto. Select it from the dropdown list.
Keyboard Control Speed
: Define the speed of PTZ control by a keyboard as Low, Medium
or High.
Auto Scan Speed
: The scan speed can be set from level 1 to 40.
M
ax. Tilt-angle
: Set the tilt-angle of the speed dome from the dropdown list.
