User Manual of E Series Network Speed Dome
5
2.1.2
Activating the Speed Dome
For the models which are already activated at manufactory, please skip the activating sections.
You can check the active or inactive security status from SADP.
The default password for the activated one is 12345.
We highly recommend you create a strong password of your own choosing (Using a minimum of 8
characters, including at least three of the following categories: upper case letters, lower case
letters, numbers, and special characters.) in order to increase the security of your product.
Purpose:
For the models which are not activated at manufactory, please refer the chapter below to
activate the speed dome before you can use it.
Activation via Web Browser, Activation via SADP, and Activation via client software are supported.
In the following sections, activation via web browser and SADP will be taken as examples. You
may refer to the user manual of the speed dome for the details of activation via client software.
Activation via Web Browser
Steps:
1.
Power on the speed dome, and connect the speed dome to the network.
2.
Input the IP address into the address bar of the web browser, and click
Enter
to enter the
activation interface.
The default IP address of the speed dome is 192.168.1.64.
Figure 2-3
Activation Interface(Web)
3.
Create a password and input the password into the password field.
STRONG PASSWORD RECOMMENDED
–We highly recommend you create a strong
password of your own choosing (Using a minimum of 8 characters, including at least
three of the following categories: upper case letters, lower case letters, numbers, and
special characters.) in order to increase the security of your product. And we
recommend you reset your password regularly, especially in the high security system,
