User Manual of E Series Network Speed Dome
52
9.
Click
to save the settings.
5.3.5
Region Entrance Detection
Purpose:
Region entrance detection function detects people, vehicle or other objects which enter a
pre-defined virtual region from the outside place, and some certain actions can be taken when
the alarm is triggered.
Steps:
1.
Enter the Region Entrance Detection settings interface:
Configuration> Event > Smart Event> Region Entrance Detection
2.
Check the checkbox of
Enable
to enable the Region Entrance Detection function.
Figure 5-24
Configuring Region Entrance Detection
3.
Select the region from the dropdown list for detection settings.
4.
Click the
button to start the region drawing.
5.
Click on the live video to specify the four vertexes of the detection region, and right click to
complete drawing.
Repeat the step to configure other regions. Up to 4 regions can be set. You can click the
button to clear all pre-defined regions.
6.
Set the detection target for the region entrance detection.
You can select human, vehicle, or
all (human &vehicle) as the detection target from the dropdown list. If Human is selected,
only human beings will be identified as detection objects and as well as Vehicle.
7.
Click
tab to enter the arming schedule setting interface. The time