NEFF F 3460, Инструкция по эксплуатации

Страница: 72 / 104

72
Gas regulations
The gas type and pressure that have been preset in
the factory are indicated on the rating plate close to
the gas connection on the rear of the cooker. If the
cooking appliance has been adjusted in the works
for a different type of gas than that available, its injec-
tors, and sometimes also its by-pass injectors must
be replaced The minimum gas flow will have to be
readjusted accordingly. In order to replace the injec-
tors in the cooking hob, it is necessary to carry out
the following operations:
• disconnect the hob from the mains before making
the necessary adjustments.
• remove the pan supports;
• remove the burners and burner caps (Fig. A);
• take out the injector (Fig. B) and replace it with
one suitable for the new type of gas (see "GEN-
ERAL INJECTORS TABLE" );
• replace the gas label (on the rear of the appli-
ance) with the new one provided with the injec-
tors kit;
• refit all parts by following the disassembly instruc-
tions in reverse order. Take care to position the
burner caps correctly on the burners.
• In the event that the appliance has to be convert-
ed to LPG 30/50 mbar the by-pass injectors in
the taps must be replaced. We recommend that
you contact the technical service for this operation.