NEFF F 3460, Инструкция по эксплуатации

Страница: 67 / 104

67
Ventilation
requirements This appliance is not connected to an extractor for
products of combustion.It must therefore be installed
and connected in compliance with current installation
standards. Pay particular attention to standards
applied to room ventilation.
This appliance can only be installed in ventilated
rooms, according to current standards, so as to allow,
with openings onto external walls or appropriate
ducts, for correct natural or forced ventilation that
permanently and sufficiently ensures both the air
intake necessary for correct combustion and the
expulsion of combusted air.
If this is the only gas appliance in the room, it is nec-
essary to install a hood so as to expel the used air
naturally and directly with a straight vertical duct at
least twice as long as its diameter and having a mini-
mum section of at least
100 cm 2 .
For the essential air intake into the room, it is neces-
sary to prepare a similar opening of at least
100 cm 2
that communicates directly outside, situated close to
floor level so as not to be obstructed from either inside
or outside and so as not to disturb the combustion
of the burners and the correct expulsion of used air
and with a height difference from the exit opening of at
least
180 cm.
Remember that the quantity of air necessary for com-
bustion is not less than
2 m 3 /h per kW of power (see
total power in kW shown on the appliance plate). In
all other cases, for example if there are further gas
appliances in the same room or natural direct ventila-
tion is not possible, it is necessary to create natural,
indirect ventilation or forced ventilation:
for this type
of operation, it is necessary to contact a qualified