Smoke hollow 30167G Assembly & Operation Download

Page: 1 / 24

Assembly

& Operation

30167G/34167G

34166GC/38207G

Gas Smoker

DANGER

FOR YOUR SAFETY - IF YOU SMELL GAS:

2. OPEN SMOKER DOOR.

1. SHUT OFF GAS TO THE APPLIANCE.

3. EXTINGUISH ANY OPEN FLAME.

4. PERFORM A GAS LEAK TEST.

5. IF ODOR CONTINUES, KEEP AWAY FROM THE APPLIANCE AND IMMEDIATELY CALL YOUR

FIRE DEPARTMENT.
FAILURE TO FOLLOW THESE INSTRUCTIONS AND WARNINGS COULD RESULT IN FIRE OR

EXPLOSION, WHICH COULD CAUSE PROPERTY DAMAGE, PERSONAL INJURY OR DEATH.

1. Never operate this appliance unattended.

2. Never operate this appliance within 10 feet (3.05 m) of any other gas cylinder.

3. Never operate this appliance within 25 feet (7.5 m) of any flammable liquid.

4. Heated liquids remain at scalding temperatures long after the cooking process. Never touch cooking

appliance until liquids have cooled to 115°F (45°C) or less.

5. If a fire should occur, keep away from the appliance and immediately call your fire department. Do not

attempt to extinguish an oil or grease fire with water.
Failure to follow these instructions could result in fire, explosion or burn hazard, which could cause property

damage, personal injury or death.

This instruction manual contains important information necessary for the

proper assembly and safe use of the appliance.

Read and follow all warnings and instructions before assembling and using the

appliance.

Follow all warnings and instructions when using the appliance.

Installer - leave the manual with the consumer.

Keep this manual for future reference.

DANGER

Summary of Contents for 30167G

























Search results

Summary of Contents for 30167G

Reviews:

Related manuals for 30167G

Brands by name

Popular brands

Smoke hollow 30167G, Assembly & Operation

Search results

Summary of Contents for 30167G

Reviews:

Related manuals for 30167G

Brands by name

Popular brands