Necta Samba Top, Установка, эксплуатация и обслуживание

Страница: 55 / 76

© by N&W GLOBAL VENDING S.p.A.
49
03 2010 3335 00
ACTuATIOn BOARD
The actuation board (see fig. 41) is only arranged in the
models also complete with belt trays.
This board manages:
Motors of spiral trays -
Motors of belt trays -
Dispensing compartment lock device -
Motor-driven dispensing compartment (if available) -
softvend
- (if available)
The board is complete with some LEDs that can supply
the following information during the operation:
- the red LED (17) will turn on if the software is reset for
any reason whatsoever.
- the green LED (21) will turn on when 5 Vdc is applied;
- the green LED (22) will turn on when 24 Vdc is ap - -
plied;
glASSfROnT lIghTIng BOARD
This board is intended to supply the glassfront lighting
LED’s with direct current for constant brightness.
The board is arranged in the slide-in compartment of
payment systems.
Fig. 40
To the CPU board 1-
To the lighting LED boards 2-
Fig 41
24Vac power supply 1-
Not used 2-
CPU 34Vdc board power supply 3-
CPU 34Vdc board power supply 4-
34Vdc safety relay 5-
Safety input relay 6-
LED lighted path 7-
Can-bus JP1 jumper (closed) 8-
Input / output 9-
Not used 10-
Actuation board programming 11-
Can-bus 12-
Can-bus 13-
Not used 14-
Not used 15-
Not used 16-
DL2 “RESET” red LED 17-
Not used 18-
Not used 19-
M8 and M9 motor 20-
DL3 “+5V” green LED 21-
DL4 “+24V” green LED 22-
JP3 WDI jumper (closed) 23-
M0 - M7 spiral motors and 1 - 7 tray 24-
Photocells (if available) 25-
Motor and compartment input 26-
softvend
27- (if available)