Necta Samba Top, Установка, эксплуатация и обслуживание

Страница: 27 / 76

© by N&W GLOBAL VENDING S.p.A.
21
12 2008 3335 00
STaTiSTicS
all the machine operation data are stored in total and
relative counters that can be reset without losing total
data.
priNt
This function is intended to print the data that have been
stored for the machine operation.
Connect an RS232 serial printer having 9600 baud rate,
8 data bits, no parity, 1 stop bit with the serial port on the
button board in order to print all statistics, i.e::
total
1 - counter by selection;
2 - counter by band,
3 - failure counter
4 - coin mechanism data
5 - photocell error counters
6 - motor errors
7 - safety temperature exceeded (models with food man -
agement enabled only)
rElativE
1 - counter by selection;
2 - counter by band,
3 - failure counter
4 - coin mechanism data
5 - photocell error counters
6 - motor errors
7 - safety temperature exceeded (models with food man -
agement enabled only)
the machine code, the printing date and time, the soft-
ware release, the manager code and the installation date
will be also printed.
to print, act as follows:
from the print function press key -
�
to display “Do you
confirm?”;
- connect the printer;
- press the Enter key
�
to start printing
D
isplay
The function is intended to sequence-display the same
data you can obtain by printing statistics.
Press the Enter key
�
to sequence-display the following
data:
total counters
1 - counter by selection;
2 - counter by band,
3 - failure counter
4 - coin mechanism data
5 - photocell error counters
6 - motor errors
7 - safety temperature exceeded (models with food man -
agement enabled only)
relative counters
1 - counter by selection;
2 - counter by band,
3 - failure counter
4 - coin mechanism data
5 - photocell error counters
6 - motor errors
7 - safety temperature exceeded (models with food man -
agement enabled only)
D
ElEtE
Statistics can be reset for relative counters either glo -
bally (all types of data) or selectively for:
selections -
failures -
coin mechanism errors -
photocell errors -
motor errors -
temperature exceeded -
Press the Enter key
�
to display the blinking message:
“Do you confirm?”
Press the Enter key
�
to reset the statistics. The display
will show the “Running” message during the operation to
reset the statistics.
SElEcTioN PricES
The machine can manage up to 4 different prices per
selection, which can be active according to the time
band you have set (standard or promotional) and/or the
payment system in use.
Use this function to vary the sales price for every single
selection by selecting among the price ranges available.