Necta Samba Top, Установка, эксплуатация и обслуживание

Страница: 48 / 76

© by N&W GLOBAL VENDING S.p.A.
42
12 2008 3335 00
cHaNgiNg THE Tray coNfiguraTioN
The configuration of the spirals on each tray can be
changed. To shift from two selections with single spirals
to one selection with double spirals, act as follows:
Remove the tray to be modified. -
Remove the central wall by pushing it towards the back -
and by lifting it later on.
Detach the spirals and the relative flanges from the two -
motors.
Disconnect the left motor from the wiring and remove it -
from the tray. In its place, fit the bush and pin bush.
First, mount the right-hand and left-hand spirals with
-
the same pitch onto the new flanges (the right one and
the left one are the same), fitted with a transmission
gear wheel. Then, couple the right-hand one with the
motor still on the tray and the left-hand one with the
bushes you have mounted before. The two gear wheels
must mesh.
Remove the price and tray labels no longer used and, if
-
necessary, update the price labels still in use.
Set the sales price you wish for the new selections.
-
Test the modified selections to be sure they are prop - -
erly working.
Please Note: The selection numbers are formed by two
digits; the first digit refers to the tray number, counting
from the top (1-7), the second digit refers to the spiral
number, counting from the left (0-8).
The selection number to which the motor is connected
will therefore be formed by the tray number plus the wire
code number.
The heat separators (limiting the machine food area) are
fastened beneath the trays by using fastening screws
HEat sEparators
The heat separators (limiting the machine food area) are
fastened beneath the trays by using fastening screws.
If you wish to convert the machine to the distribution of
snack products only, remove the heat separator (see fig.
29):
extract the trays where you have fastened the heat -
separators and remove all fastening screws.
remove heat separators.
-
disable the “food management” from the technician -
menu
You can increase or decrease the trays suitable for dis -
pensing “food” products by moving heat separators
Fig. 30
Tray 1-
Mobile walls 2-
Right spiral 3-
Left spiral 4-
Heat separator 5-