background image

© by N&W GLOBAL VENDING S.p.A. 

28

 

12 2008 3335 00

m

iNimum

 

tubE

 

lEvEl

Used to set a number of coins between 0 and 15 in order 

to establish the status of full change tubes and to warn 

the user to “insert the exact amount”.

b

ill

 

rEaDEr

 

fuNctioN

 (

bill

 

rEvaluE

)

used to enable the bill reader only to recharge the credit 

on the cashless system (key or card)

i

NDEfiNitE

 

crEDit

 

accEptaNcE

This function is intended to accept cashless payment 

systems (key or card) or not if the cashless system credit 

is not defined.

g

roups

 

of

 

usErs

The function is intended to associate a price list (list 1, 

list 2 and list 3) to the groups of users (from 1 to 5).

All groups of users are associated to list 1 by default.

PricES

From this menu you can set up prices individually (for 

every single selection) or globally (the same price for 

all selections) and define the ranges of the promotional 

time band.

The machine can manage up to 4 different prices for 

every single selection, which may be active according to 

the time band you have set up (either standard or promo

-

tional) and/or the payment system in use.

PRICEs

InDIVIDual PRICE

GloBal PRICE

PRoMotIonal tIME BanD

TECH> x.x

Prices are grouped into 4 lists and they can be pro

-

grammed (from 0 to 65,535) for each one of the 4 lists 

either globally (the same price for all selections) and for 

every single selection.

the price of one single selection can be directly varied 

from the keyboard too.

If you have to sell most products at the same price, it 

will be advisable to programme the price globally and 

to change the price of the selections having a different 

sales price.

bDv

ExEcutivE

valiDators

These systems enable you to manage not only the 

standard price list, but also a promotional price list if the 

time band is enabled by the corresponding function.

selections will be dispensed at the price of the promo-

tional list during the time intervals you have programmed.

mDb

These systems are intended to establish whether to use 

the 4 price lists at the same time or to use two alternative 

ranges according to the time band you have set up.

If you do not use the time band, you can manage not 

only the standard price list, but also three further price 

lists according to the type of cashless support in use 

(key 1-3).

If you use a time band, selections will be dispensed at 

a price other than the standard one for the cashless 

system. During the time intervals you may have pro

-

grammed, selections will be dispensed at two different 

promotional prices for the standard list and the cashless 

system.

p

romotioNal

 

timE

 

baND

4 time ranges programmable for the sale at different 

prices.

 

Ranges can be set up by hour (from 00 to 23) and by 

minute (from 00 to 59).

 

The time of reference is supplied by an internal clock.

Содержание Samba Top













































































Отзывы: