Necta Samba Top, Установка, эксплуатация и обслуживание

Страница: 49 / 76

© by N&W GLOBAL VENDING S.p.A.
43
12 2008 3335 00
rEPlaciNg THE SPiralS
to replace the spirals, act as follows:
Extract the tray in question. -
Rotate the spiral in the direction opposite to the ejec- -
tion rotation while holding the plastic support flange still
to separate the two parts.
Fit the new spiral unit by acting in the opposite direc
- -
tion: Make sure that the spiral is positioned correctly.
The spirals can be positioned with 22.5 degree steps by
pulling them towards the front and rotating them in the
direction of ejection.
The products can be dispensed without any problem
when the spiral end is at the bottom and in the middle.
If the pitch and sense of spirals is known, the table here
below and of fig. 23 will help you calculate the maximum
size and the number of dispensable products.
Spiral pitch
(mm)
Product size
(mm)
Products per
spiral
80 76 6
64 60 7
54 50 8
46 42 9
40 36 10
34 30 11
30 26 13
24 20 15
24 (180°) 20 19+19
The machine is supplied with a table indicating the opti -
mum setting for the various product types.
SaNdWicH TrayS
macHiNEs witH softvEND
.
To prevent the sandwich package from interfering during
the
softvEnd
movement, it is recommended to apply the
product ejector on the right to the spiral.
Couple the right ejector on the spiral. Make sure that -
the shim is directed to the sandwich to prevent the
sandwich from protruding from the tray (see figure).
macHiNEs witHout softvEND
.
No ejector is required.
Fig. 31
Spiral 1-
Plastic flange 2-
Fig. 29
Sandwich 1-
Ejector 2-
Spiral 3-