Necta Colibri, Руководство по установке, использованию и техническому обслуживанию

Страница: 11 / 48

7
© by NECTA VENDING SOLUTIONS SpA 01-2003 197 00
- in order to remove the impellers, block the disk fitted
on the mixer shaft with a finger (see Fig. 4);
MIXER CLEANING
The mixer must cleaned daily and every time the machine
is refilled to prevent clogging of the mixer if any product is
accidentally spilled during refilling.
It must be cleaned also after the mixer sanitising opera-
tions, as described in the relevant chapter.
The mixer is cleaned with the door closed, doing as
follows:
- press button 8 for 2 seconds
The display will show the request to enter the pass-
word;
- press in a quick succession buttons 4 4 8 8 to start
cleaning.
- wash all parts with detergent being sure that all visible
residue and product layers are mechanically removed,
using a brush if necessary;
Disinfection should be carried out using chlorine-based
detergents.
- soak all components for approx. 20 minutes in a
container filled with the previously prepared chlorine-
based detergent;
- reinstall the feeders and the water funnels;
- reinstall the powder deposit drawers and the powder
funnels after thoroughly drying them.
After reinstalling all parts the following is however
required:
- add a few drops of the chlorine-based detergent in the
mixer;
- using the mixer cleaning function with the door closed,
thoroughly rinse all components to ensure that all
residue of the detergent solution is removed.
CLEANING THE WATER SUPPLY TANK
(O
PTIONAL
)
For machines equipped with a water tank inside the
support cabinet, such tank must be sanitised at least once
a week with the chlorine-based detergent used for the
mixers.
Fig. 4