NEC Univerge SV9300, Сетевое руководство, Страница: 167 / 364

Chapter 1 CCIS FEATURES
1-153
NWA-088654-001 Rev.1.0
94ch1005.fm
DIAL ACCESS TO ATTENDANT-CCIS
• When SV9300 is a slave office:
DESCRIPTION DATA
Assign the access code for LCR Group 3
(A129). •
(1)
(2)
Y=0: Number Plan Group 0-3
X-XXXX
A129
Assign an area code table to be used to select a
route pattern table. •
(1)
(2)
Y=A000
3: LCR Group 3
4005-4007: Area Code Development Pat-
tern No. 5-7
Assign the Route Pattern number to the Area
Code Development Pattern number assigned
by CM8A Y=A000. •
(1)
(2)
Y=4005-4007
X-X...X: Area Code (Maximum 8 digits)
0000-0255: Route Pattern No. 000-255
Assign the next Route Pattern number to the
Route Pattern number assigned by CM8A
Y=4005-4007.
NOTE: This data is required to expand the
order of LCR selection that is
assigned by CM8A Y=0000-0255.
The order of LCR selection can be
expand to the maximum seventh.
•
(1)
(2)
Y=0000-0255 Route Pattern No.000-255
0: Designation of next table
0000-0255: Next Route Pattern No.000-
255
Assign the intra-office station to the Area Code
Development Pattern number assigned by
CM8A Y=A000. •
(1)
(2)
Y=4005-4007 Area Code Development
Pattern No. 5-7
X-X...X: Area Code (Maximum 8 digits)
8001-8008: 1-8 digits Intra-Office Station
Assign the route pattern table with the desired
properties and selection of appropriate routes. •
(1)
(2)
Y=0000-0255: Route Pattern No. 000-255
1-4: Order of LCR Selection
1: 1st
2: 2nd
3: 3rd
4: 4th
XXX ZZ
XXX: 000-255: LCR Pattern No.
ZZ : 00-63: Trunk Route No.
START
CM20
CM8A
END