NEC SV8300, Руководство по управлению

Страница: 678 / 804

3-622
NWA-033623-001 Rev.8.1
91ch3007.fm
COMMAND CODE TITLE:
SIP PROFILE DATA
BA
: Default
Y 1ST DATA 2ND DATA
RELATED
COMMAND
No. MEANING DATA MEANING DATA MEANING
79 Setting of SIP trunk
domain name for SIP-
URI with character
code (Last 8 charac-
ters) 00
31
Profile number
for control packet XXX...X
NONE
Domain name
(16 digits, 8 charac-
ters fixed)
See Character
Code Table in
CM77.
No data
CMA7 Y=71
CMBA
Y=76-78
NOTE 1: Concatenated characters assigned by CMBA Y=77, 78, and 79 are used as domain name.
NOTE 2:
When setting a character code to be set is less than the number of digits necessary, add the char-
acter code FF.
NOTE 3:
You can confirm the domain name set by this command with CMBA Y=76.
NOTE 4: Set the second data to NONE for Point-to-Multipoint connection (when CMA7 Y=46 is set to “0”).
NOTE 5:
When SIP-URI is “1234@nec.com”, the part of “nec.com” is set by this command. When NONE
is set by CMBA Y=77, 78 and 79, IP address such as “1234@192.168.1.1” is used.
82 Terminating system
when recognizing
called sub address
[North America
Only]
[8300R4]
00
31
Profile number
for control packet 0
1 Station call
As per terminating
system CMA7 Y=71
NOTE: Set the second data to “1” for Point-to-Multipoint connection (when CMA7 Y=46 is set to “0”).
83 Session Timer provid-
ing 00
31
Profile number
for control packet 0
1 Not provided
To provide CMA7 Y=71
CMBA Y=29,
56, 88
NOTE 1: Set the second data to “1” for Point-to-Multipoint connection (when CMA7 Y=46 is set to “0”).
NOTE 2: For Point-to-Multipoint connection (when CMA7 Y=46 is set to “0”), unify whether to use the
session timer method in a network.
Continued on next page
RESET
~
RESET
~
RESET
~
JANUARY/14/2011
CMBA