34
SuperScript 1800 — Network User’s Guide
Configuring a Macintosh Client
Macintosh clients send print jobs over AppleTalk to a
NetWare print server. To the Macintosh client, the NetWare
print server looks like any other AppleTalk device in a zone.
Software Requirements
For Macintosh computers to connect to the printer, they must
meet three software requirements:
•
The operating system must be Mac OS 7.1 or higher.
•
The standard Macintosh
LaserWriter8
printer driver must
be installed.
•
The
NEC SuperScript 1800 PPD
must be installed.
Printer Hardware Requirements
Since Macintosh computers send their print jobs in the
PostScript language, the SuperScript 1800
must
be upgraded
with the PostScript Level 2 Upgrade Kit
(Order No. 1802).
Installing the Software
Software installation involves installing the LaserWriter
printer driver and SuperScript 1800 PPD.
I
NSTALLING
THE
L
ASER
W
RITER
P
RINTER
D
RIVER
The
LaserWriter
printer driver is standard to the Mac OS 7.1
and higher. Check the Macintosh Chooser to assure that it is
installed. If it isn’t, use the Mac OS help system for
information about installing it.
I
NSTALLING
THE
S
UPER
S
CRIPT
1800 PPD
The SuperScript 1800 PPD is installed from the
SuperScript
1800 Solutions CD
.
To install the SuperScript 1800 PPD:
1.
Insert the
SuperScript 1800 Solutions CD
into your
Macintosh and the SS1800 window will appear.
2.
Double-click the
SuperScript 1800 Installer
icon to begin
installing the PPD. Follow the instructions presented on
the monitor.
3.
From the
Apple
menu, select
Chooser
to open the
Chooser
window.
4.
From the left pane of the
Chooser
window, select
LaserWriter8
and a
name
for the SuperScript 1800 printer
will appear in the right pane of the window.
Note:
If the printer’s NIC has been configured with an
AppleTalk Printer Name
, as described on Page 16 or Page
60, that name will appear in the right pane. If a name was
not created, the MAC address for the printer’s NIC will
appear. The MAC address can be identified with the NEC
prefix, for example NEC000012345678.
5.
Click
Create
to setup the printer. When created, an icon
will appear on the desktop using the AppleTalk Printer
Name or MAC address as its label.
6.
Close the
Chooser
window.
Configuring a UNIX Client
Configuring a UNIX computer involves two procedures:
configuring the host table, then adding access to the printer.
Before doing the procedures, the following requirements
must be met.
•
The computer must be running Sun Solaris OS 2.51 or
higher.
•
The computer must be running X-Windows.
Configuration Procedures
To configure the Host Table:
1.
Login into the computer as
root
.
2.
Move to a shell command prompt.
3.
Type
vi /etc/hosts
then press
ENTER
to display the Host
Table (also known as the look-up table).
4.
At the bottom of the table, add the IP address and a host
name for the printer.
5.
Press
esc
to exit edit mode.
6.
Type
:wq!
then press
ENTER
to save the changes and exit
the editor.
After the host table has been configured, add access to the
printer.
To add access to the printer:
1.
From a shell prompt, type
admintool &
then press
ENTER
to start Admintool.
2.
From the
Browse
menu, select
Printers
to list all the
printers connected to the network.
3.
From the
Edit
menu, point to
Add
, then select
Access to
Содержание SuperScript 1800
