NEC SuperScript 1800, Руководство пользователя сети

Страница: 20 / 82

14 SuperScript 1800 — Network User’s Guide
Configuring the Printer for UNIX Clients
Use this procedure if computers running UNIX will be
sending print jobs to the printer.
To configure as a UNIX printer:
1. From the printer’s Operator Panel , press GO until
OFFLINE
appears on the Operator Panel display.
2. Press MENU until
NETWORK MENU
appears.
3. Press ITEM until
CFG NET
appears.
4. Press VALUE until
YES
appears.
5. Press SELECT .
6. Press ITEM until
LPD
appears.
7. Press VALUE until
YES
appears.
8. Press SELECT .
9. Press GO to exit.
Configuring the Printer for AppleTalk
Use this procedure if Macintosh computers will be sending
print jobs to the printer.
Note:
Since Macintosh computers send their print jobs
in the PostScript language, the SuperScript 1800 must be
upgraded with the PostScript Level 2 Upgrade Kit (Order
No. 1802). For more information, see Chapter 8, “Printer
Options,” of the SuperScript 1800 User’s Guide. If calling
from North America, you can dial 1-800-632-4650.
To configure the printer for AppleTalk:
1. From the printer’s Operator Panel , press GO until
OFFLINE
appears on the Operator Panel display.
2. Press MENU until
NETWORK MENU
appears.
3. Press ITEM until
CFG NET
appears.
4. Press VALUE until
YES
appears.
5. Press SELECT .
6. Press ITEM until
APL TALK
appears.
7. Press VALUE until
YES
appears.
8. Press SELECT .
9. Press GO to exit.
After this procedure is completed you should use the
SuperScript 1800 Web Pages to assign an AppleTalk name to
the printer. This will make it easier for Macintosh users to
identify the printer.
The web pages can be viewed by using any popular web
browser to navigate to the printer’s IP address.