Configuring the NIC
13
CONNECTING THE PRINTER
C
ONFIGURING
THE
NIC
4.
Press
ITEM
until
CFG ADDRS
appears.
5.
Do one of the following.
•
If you plan on having a BOOTP or RARP server
assign an IP address to the printer, press
VALUE
until
NO
appears.
a.
Then press
SELECT
.
b. Press
ITEM
until
BOOTP
or
RARP
appears.
c.
Press
VALUE
until
YES
appears.
d. Press
SELECT
.
e.
Press
GO
to exit.
f.
Restart the printer.
•
If you want to enter an IP address, press
VALUE
until
YES
appears.
a.
Then press
SELECT
.
b. Press
ITEM
until
IP BYTE1
appears.
c.
Press
VALUE
until
YES
appears.
d. Press
SELECT
.
e.
Press
VALUE
until the first octet of the IP
address appears.
f.
Press
Select
.
g. Repeat Steps “B” through “F” for IP BYTE2,
IP BYTE3, and IP BYTE4.
h. If you want to configure a subnet mask and/or
gateway (router) address, press ITEM to move to
the SM BYTE and GW BYTE menus, then use the
same procedures as described above.
i.
Press
GO
to exit.
Configuring the Printer for IPX
If the printer will be communicating through a NetWare
network, use this procedure for turning on IPX and selecting
the type of Ethernet framing used by the network. The
printer can be configured to determination the framing
automatically, or set to use a specific type.
To configure IPX protocols:
1.
From the printer’s
Operator Panel
, press
GO
until
OFFLINE
appears on the Operator Panel display.
2.
Press
MENU
until
NETWORK MENU
appears.
3.
Press
ITEM
until
CFG NET
appears.
4.
Press
VALUE
until
YES
appears.
5.
Press
SELECT
.
6.
Press
ITEM
until
NetWare
appears.
7.
Press
VALUE
until
YES
appears.
8.
Press
SELECT
.
9.
Press
ITEM
until
CFG NWAR
appears.
10. Press
VALUE
until
YES
appears.
11. Press
SELECT
.
12. Press
ITEM
until
AUTO
appears.
13. Do one of the following.
•
If you want the printer to automatically determine
the type of Ethernet framing used by your network,
press
VALUE
until
ON
appears. Using this method
may slow down the processing of print jobs.
a.
Then press
Select
.
b. Press
GO
to exit.
•
If you know what type of Ethernet framing is used
by your network, press
VALUE
until
OFF
appears.
Using this method may speed up the processing of
print jobs.
a.
Then press
SELECT
.
b. Press
ITEM
until your frame type appears.
Framing for Ethernet 802.2, 802.3, II, or SNAP
can be selected.
c.
Press
VALUE
until
YES
appears.
d. Press
GO
to exit.
Содержание SuperScript 1800
