NEC SuperScript 1800, Руководство пользователя сети

Страница: 16 / 82

10 SuperScript 1800 — Network User’s Guide
I
NSTALLING THE
NIC
Installing the NIC involves first accessing the printer
Controller Board.
Accessing the Printer Controller Board
The printer Controller Board manages and controls all
printer functions. It is also the place where the NIC is
installed.
To access the Controller Board:
1. Turn off the printer.
2. Pull out the 500-sheet Cassette tray (A) .
3. Disconnect all cables from printer.
4. Position the printer so the right side of the printer can be
worked on.
5. Remove screws from the side cover then open
back cover
(B) .
6. Pull tab to release the side cover (C) .
7. Slide side cover towards the back of the printer (D) .
8. Rotate the side cover away from printer (assure wire-
snaps on the parallel port are not in the way), then lift the
side cover away
(E) .
9. Loosen top screw of controller board cover, remove
remaining 4 screws, then remove the metal cover
(F) .
When finished with Step 9, continue at “NIC Installation” on
page 11.
A B C
D E F
Accessing the Printer Controller Board