NEC SuperScript 1800, Руководство пользователя сети

Страница: 33 / 82

NetWare Networks 27
PRINTER SERVER TOPOLOGY
N
ET
W
ARE
N
ETWORKS
Configuring NetWare 3.12
Use the NetWare Print Console to create a print queue then
assign a queue server.
To create a print queue then assign it to a queue server:
1. Obtain the MAC address for your printer’s network
interface card (NIC) by printing a NIC Configuration
Page. For instructions about this, see “Printing a
Network Configuration Page” on page 16.
In the LAN Interface Details section of the NIC
configuration page, the MAC address is identified by the
Physical Address.
2. From any client computer, log onto the network with
administrator privileges.
3. Start pconsole.exe .
This program can be found at the following path.
F:\Public\Pconsole.exe
4. From the Available Options list, select Change Current
File Server to display all the file servers attached to the
network.
Note:
If the server you want is not seen, press Insert to
open the Other File Servers list, then make your selection
from there.
5. Select the file server where the print queue must be
created.
6. Press esc to return to the Available Options list.
7. Select Print Queue Information to display the Print
Queues list.
8. Press Insert to display the New Print Queue Name dialog
box.
9. Type in a name for your print queue, then press Enter .
10. From the Print Queues list, select your new print queue.
11. Press Enter to display the Print Queue Information list.
12. Select Queue Servers , then press Enter to display the
Queue Server list.
13. Press Insert to display the Queue Server Candidates list.